Download Viewer for files : Acrobat Reader

CAN-PC-Interfaces

	CPC-PCIe is a passive CAN interface for the PCIe x1 bus. CPC-PCIe includes either one or two CAN controller(s) of type NXP SJA1000. Galvanic decoupling is optionally available. Download or View datasheet.
	CPC-PCI is a passive CAN interface for the PCI bus. CPC-PCI includes either one or two CAN controller(s) of type NXP SJA1000. Galvanic decoupling is optionally available. Download or View datasheet.
	CPC-USB/ARM7 is an interface for USB ports. CPC-USB includes a powerful 32-bit microprocessor with built-in CAN controller. Galvanic decoupling is optionally available. Download or View datasheet.
	EtherCAN CI is an Ethernet/CAN Interface connecting CAN systems with an Ethernet network. Although the main purpose of EtherCAN CI is the use as a CAN interface, optional software packets allow an upgrading for decentral control purposes like monitoring or configuration of CAN nodes. Download or View datasheet.
	CPC-104I is a PC-104 based CAN interface with one or two CAN controllers of type NXP SJA1000 and a local microcontroller of type Dallas DS320. 64k Flash-ROM , 32k RAM and galvanic isolation are included in the standard configuration. Download or View datasheet.
	CPC-104Mis a CAN interface module for PC­104 based systems. Designed for industrial series applications CPC-104M has a robust and cost efficient construction. CPC­104M supports up to 4 NXP SJA1000 CAN controllers. CPC-104M is available in different configurations regarding CAN channel count and galvanic decoupling. Download or View datasheet.
	CPC-XT is a plug-in CAN interface. CPC-XT includes either a NXP SJA1000 (version CPC-XT/SJA1000) or an Intel AN82527 (version CPC-XT/82527) CAN controller. Galvanic decoupling is optionally available. Download or View datasheet.
	CPC-XTI is a plug-in CAN interface with one or two CAN controllers of type NXP SJA1000 and a local microcontroller of type Dallas DS320. 64k Flash-ROM , 32k RAM and galvanic isolation are included in the standard configuration.  Download or View datasheet.
	CPC-Card is a CAN interface for PC-Card slots. CPC-Card includes 2 CAN controllers of type NXP SJA1000, which are directly mapped into the PC memory address space. Download or View datasheet.
	CPC-PP is an active printer-port interface to connect to the CAN bus. It has a local microcontroller and a CAN controller NXP SJA1000. CPC-PP has a robust design with electronics enclosed by epoxy resin and is especially suitable for system configuration and field service. Download or View datasheet.