Product image: CAN plugin card PCI Bus, 1 or 2 channels, galvanic separation
Datasheet PDF-Document
Manual PDF-Dokument


Related products:
»  CAN plugin card PCIExpress
»  CAN USB Interface
»  CAN Development kit (Windows/Linux)

Ordering information:
CPC-PCI/SJA1000S low profile10-05-240-20
CPC-PCI/SJA1000S-GTIS low profile10-05-241-20
CPC-PCI/SJA1000D low profile10-05-242-20
CPC-PCI/SJA1000D-GTID low profile10-05-243-20
CPC-PCI/SJA1000D-GTI2S low profile10-05-244-20

CAN Plug-In Board CPC-PCI low profile

Special Features

  • Passive CAN Interface for PCI slots, low profile
  • One or two CAN channels with Controller NXP SJA1000
  • Optional galvanic separation of CAN controller to PC
  • Optional galvanic separation between CAN channels
  • Supports 11 bit frames and 29 bit frames
  • Development kits for Windows 2000/XP/Vista/7/8 and Linux available


CPC-PCI low profile is a passive CAN plug-in board for PCI slots. CPC-PCI low profile was designed for industrial series application and has a robust and cost efficient construction. CPC-PCI low profile supports either one or two CAN channels that can be operated independently with different data rates. The interface comes with the NXP CAN controller SJA1000, that offers good diagnostic attributes. CPC-PCI low profile maps the CAN controller(s) directly in the address space of the PC and allows access of the CAN messages with low latencies. Existing software for the supported CAN controller can easily be adapted. The CAN communication with CPC-PCI low profile may be handled either in interrupt controlled mode or in polled mode, interrupt channels are assigned automatically (Plug & Play). Optionally, CPC-PCI low profile is available with galvanic separation between PC and CAN bus. A galvanic separation between the CAN channels is also possible by separate DC/DC converters.

Technical Data

Bus Interface

Pin assignment Connector DSub 9, complying to CiA DS-102
Type of the physical connection ISO 11898 / Transceiver PCA82C251
Maximum voltage on bus pins ±30V referring to bus ground
Isolation voltage with galvanic separation ±1000V DC


Resource Parameter
PC address space Automatic assignment (Plug & Play)
Interrupt Automatic assignment (Plug & Play)

Programming Interface

Configuration and CAN communication with CPC-PCI low profile are done by accesses to the memory address area of the PC. The appropriate data areas are mapped by CPC-PCI low profile and "plug & play" software into the memory address space. Due to the direct access to the CAN controllers the CAN communication takes place with low latency time. The memory used by CPC-PCI low profile is divided in several sections. The control registers allow the detection of the interface type similar to the interfaces CPC-Card, CPC-XT and CPC-104 and the generation of hardware resets for the CAN controllers. The access to the CAN controllers occurs via a separate memory space for each interface. In these memory spaces, the sending and receiving buffers as well as the control registers of the CAN controllers are accessible. A specification describing the access to the CAN controllers as well as drivers for Windows and Linux are available separately.

Scope of Delivery

  • Plug in board CPC-PCI low profile
  • User Manual
  • proCANtool CAN Monitor for operating systems Windows 2000/XP/Vista/7/8