CAN Plug-In board CPC-PCIe

CAN Plug-In board CPC-PCIe

CPC-PCIe is a passive CAN plug-in board for PCIe x1 slots.

Special Features

CAN Plug-In board CPC-PCIe

  • Passive CAN interface for PCIe x1 slots
  • One, two or four CAN controllers NXP SJA1000
  • Optional galvanic separation of CAN controller to PC
  • Optional galvanic separation between CAN channels
  • Supports 11 bit frames and 29 bit frames
  • Development kits for Windows 2000/XP/Vista/7/8 and Linux available

Description

CPC-PCIe is a passive CAN plug-in board for PCIe x1 slots. CPC-PCIe was designed for industrial series application and has a robust and cost efficient construction. CPC-PCIe supports either one, two or four CAN channels that can be operated independantly with different data rates. The interface comes with the NXP CAN controller SJA1000, that offers good diagnostic attributes. CPC-PCIe maps the CAN controller(s) directly in the address space of the PC and allows access of the CAN messages with low latencies. Existing software for the supported CAN controller can easily be adapted. The CAN communication with CPC-PCIe may be handled either in interrupt controlled mode or in polled mode, interrupt channels are assigned automatically (Plug & Play). Optionally, CPC-PCIe is available with galvanic separation between PC and CAN bus. A galvanic separation between the CAN channels is also possible by separate DC/DC converters.

Ordering information

Equipment / Variants

10-11-200-10

CPC-PCIe/SJA1000S

Galvanic seperation: None

Numbers of channel: 1 Channel

CAN Physics: high speed

Protocol: CAN

10-11-201-10

CPC-PCIe/SJA1000S-GTIS

Galvanic seperation: Host separated, Channels separated

Numbers of channel: 1 Channel

CAN Physics: high speed

Protocol: CAN

10-11-210-10

CPC-PCIe/SJA1000D

Galvanic seperation: None

Numbers of channel: 2 Channel

CAN Physics: high speed

Protocol: CAN

10-11-211-10

CPC-PCIe/SJA1000D-GTID

Galvanic seperation: Host separated, Channels common

Numbers of channel: 2 Channel

CAN Physics: high speed

Protocol: CAN

10-11-212-10

CPC-PCIe/SJA1000D-GTI2S

Galvanic seperation: Host separated, Channels separated

Numbers of channel: 2 Channel

CAN Physics: high speed

Protocol: CAN

10-11-230-10

CPC-PCIe/SJA1000Q

Numbers of channel: 4 Channel

Galvanic seperation: None

CAN Physics: high speed

Protocol: CAN

10.11-232-10

CPC-PCIe/SJA1000Q-GTIS

Numbers of channel: 4 Channel

CAN Physics: high speed

Protocol: CAN

Galvanic seperation: Host separated, Channels separated

0

Technical Data

Bus Interface

Pin assignment Connector D-Sub 9, complying to CiA DS-102
Type of the physical connection ISO 11898 / Transceiver PCA82C251
Maximum voltage on bus pins ±30V refering to bus ground
Isolation volatage with galvanic separation ±1000V DC

Configuration

Ressource Parameter
PC address space Automatic Assignment (Plug & Play)
Interrupt Automatic Assignment (Plug & Play)

Programming Interface

Configuration and CAN communication with CPC-PCIe are done by accesses to the memory address area of the PC. The appropriate data areas are mapped by CPC-PCIe and „plug&play” software into the memory address space. Due to the direct access to the CAN controllers the CAN communication takes place with low latency time The memory used by CPC-PCIe is divided in several sections. The control registers allow the detection of the interface type similiar to the interfaces CPC-Card, CPC-XT and CPC- 104 and the generation of hardware resets for the CAN controllers. The access to the CAN controllers occurs via a separate memory space for each interface. In these memory spaces, the sending and receiving buffers as well as the control registers of the CAN controller are accessible. A specification describing the access of the CAN controllers and drivers for Windows and Linux are available separately.

Scope of Delivery

  • Plug In board CPC-PCIe
  • User Manual
  • proCANtool CAN-Monitor for operating system Windows 2000/XP/Vista/7/8

Related Products

CAN plugin card CPC-PCIe

USB-CAN Interface CPC-USB/embedded

CAN plugin card CPC-104p

PCIe low profile

Further Information

CAN Technical Information

International Sales

For US/Canada/Mexico sales, please contact: Traquair Data Systems, Inc. (www.traquair.com); sales@traquair.com; Ph: +1 607 266 6000