Ethernet/CAN Interface EtherCAN CI-ARM7

Ethernet/CAN Interface EtherCAN CI-ARM7

is a interface, which transmits data between CAN networks and Ethernet systems.

Special Features

Ethernet/CAN Interface EtherCAN CI-ARM7

  • Application as Ethernet based interface to the CAN bus
  • Filtering and buffering of CAN traffic
  • Microcontroller Nuvoton NUC740A with CAN­ controller NXP SJA1000
  • Supports the CAN protocols 2.0A and 2.0B
  • Serial interface for the configuration of the device
  • Rail mountable
  • Free of charge development kits for Windows 7/8.x/10/11 and Linux

Description

The Ethernet/CAN ­Gateway EtherCAN CI-ARM7 transmits data between a CAN network and Ethernet systems. As an universal CAN­ interface with an Ethernet interface, EtherCAN CI-ARM7 is independent from internal data buses and thus can be used with a variety of different work stations (PC, Mac, UNIX­-workstation).EtherCAN CI-ARM7 includes a Nuvoton NUC740A (ARM7 core) with 80 Mhz clock and a Linux operating system. In addition, the device has 16 MB SDRAM and 2 MB Flash. The connection to the CAN bus is done by a CAN controller of type NXP SJA1000 and supports the CAN protocols 2.0A and 2.0B.The protocol used for the communication between a host and EtherCAN CI-ARM7 is documented and disclosed.Development kits that allow the development of client applications for the operating systems Windows 7/8.x/10/11 or Linux are available free of charge.

Ordering information

Equipment / Variants

12-20-307-10

EtherCAN CI-ARM7/RMD -V. 2.1

Galvanic separation: None

Number of channels: 1 Channel

CAN Physics: high speed

Structural shape: Mounting rail

Protocol: CAN

Transmission: Ethernet

12-20-308-10

EtherCAN CI-ARM7/RMD - M4D - V. 2.1

Galvanic separation: None

Number of channels: 1 Channel

CAN Physics: high speed

Structural shape: Mounting rail

Protocol: CAN

Transmission: Ethernet

CANopen Software: CANopen-Master-Software M4D

0

Technical Data

Layout and Connection

EtherCAN CI-ARM7 includes a CAN segment connected by a male and a female plug of type D-Sub9, the pin assignment complying to CiA DS-102 standard. Besides the CAN signals the connectors also carry the power supply for EtherCAN CI-ARM7. In addition, EtherCAN CI-ARM7 includes an Ethernet connector (RJ45, 10/100 MBit/s) and a serial connector (D-Sub9).
The following table shows the assignment of the CAN connectors:

PinNameFunction
2CAN_LCAN data line (dominant low)
3, 6GNDGround
7CAN_HCAN data line (dominant high)
9VccPower supply +24 V

Limiting Values

ParameterMinimalMaximalUnit
Storage temperature-25+70°C
Operating temperature0+60°C
Supply voltage-100+35V
Voltage on the bus connections-30+30V

Any (also temporary) stress in excess of the limiting values may cause permanent damage on EtherCAN CI-ARM7 and other connected devices. Exposure to limiting conditions for extended periods may affect the reliability and shorten the life cycle of the device.

Nominal Values

ParameterMinimalTypicalMaximalUnit
Current consumptionn.s.70150mA
Supply voltage102430V

All values, unless otherwise specified, refer to a supply voltage of 24 V and an environmental temperature of 20 °C.

Scope of Delivery

  • Ethernet/CAN interface EtherCAN CI-ARM7
  • User manual
  •  proCANtool CAN­-Monitor for operating systems Windows 7/8.x/10/11

Further Information

CANopen in Greenhouse Management

International Sales

For US/Canada/Mexico sales, please contact: Traquair Data Systems, Inc. (www.traquair.com); sales@traquair.com; Ph: +1 607 266 6000