Navigation
USB/CAN Interface CPC-USB/ARM7
is a CAN interface for USB ports with optional galvanic decoupling in a robust metal housing.
USB/CAN-FD Interface CPC-USB/FD
is a CAN-FD interface with galvanic decoupling for USB ports in a robust metal housing.
USB/CAN Interface CPC-USB/embedded
is a CAN interface for internal USB ports with galvanic decoupling.
CAN Plug-In Board CPC-PCIe
is a passive CAN plug-in board for PCIe x1 slots with optional galvanic decoupling for 1, 2 or 4 channels.
CAN Plug-In Board CPC-PCIe low profile
is a passive CAN plug-in board for PCIe x1 slots in compact embedded PCs with optional galvanic decoupling for 1 or 2 CAN channles.
CAN-Repeater CRep Opto/M12
is a galvanic decoupling CAN repeater in a metal housing, which transmits and amplifies CAN signals in a protocol transparent way.
CAN-Repeater CRep S26
is a CAN Repeater with 26 CAN channels, which transmits and amplifies signals transparent to the CAN protocol.
CAN-Repeater CRep S10I
is a galvanic decoupling CAN repeater with 10 CAN channels, which transmits and amplifies signals transparent to the CAN protocol.
CAN-Repeater CRep S8C
is a cascadable CAN repeater with 8 channels, which amplifies signals transparent to the CAN protocol.
CAN-Repeater CRep S4
is a CAN repeater with 4 channels, which transmits and amplifies signals transparent to the CAN protocol.
CAN-Repeater CRep N
is a rail mountable CAN repeater, which transmits and amplifies CAN signals in a protocol transparent way.
CAN-Repeater CRep Opto
is a galvanic decoupling CAN repeater, which transmits and amplifies CAN signals in a protocol transparent way.
CAN-Repeater CRep DS 102
transmits and amplifies CAN signals in a protocol transparent way.
Optical-Fiber-Transceiver CTrans OL
acts as a transceiver for protocol transparent transmission of CAN signals between copper based sections via an optical fiber.
Ethernet/CAN-Interface EtherCAN CI-ARM9/RMD
acts as a gateway between 2 CAN channels and Ethernet systems.
Ethernet/CAN-Interface EtherCAN-CI/ARM7
transmits data between a CAN network and Ethernet systems.
CAN/CAN-Gateway CG-ARM7
is rail mountable and transmits CAN signals between subsystems.
CAN/CAN-Gateway CG-ARM7/GTI
transmits CAN signals between galvanic decoupled subsystems with differing data rates.
CAN/CAN-Gateway CG-ARM7/D/E
is designed for applications with a demand for high flexibility.
CAN Physical Layer Analyser CANwatch
is an analyser supporting easy error detection during installation and operation of CAN networks.
CAN-Fiber-Optic-Router CG-FL
The router CG FL, fitted in a compact housing with integrated connector, transmits data between CAN subnets via optical fibre.
CAN-Fiber-Optic-Router EtherCAN FX
EtherCAN FX transmits data between CAN networks using optical fibre.
Serial/CAN-Gateway SerCAN-ARM7
is a protocol converter between CAN and devices with RS232 interfaces.
CAN Plug-In Board CPC-PCI
is a passive CAN plug-in board for PCI slots with optional galvanic separation for one, two or four CAN channels.
PC-104 CAN-Interface CPC-104M
is a passive CAN interface module for PC–104 based systems with optional galvanic separation for one, two or four CAN channels.
PCI-104 CAN Interface CPC-104P
is a passive CAN interface module for PCI-104 or PC-104plus slots with optional galvanic separation for one, two or four CAN channels.
CAN-Plug-In-Board CPC-PCI low profile
is a passive CAN-plug-in board for PCI slots in embedded PCs with optional galvanic seperation for one or two CAN-channels.
CAN-IO Module CIO
is a versatile I/O module for the CAN bus.
CAN-T-Connectors
CAN T–Connectors serve to connect CAN nodes to the CAN bus complying with CiA Draft Physical Layer (DS 102-1).
CAN-Termination-Plugs and CAN-Termination-Connectors
With the CAN terminating plugs bus termination can be realized with D-Sub 9 connectors according to CiA (DS 102-1).
CAN-Cables
CAN cables with connectors complying with CiA Draft Physical Layer (DS 102-1) serve to connect CAN nodes and include each a male and a female connector of type D-Sub 9.
CAN-Fiber-Optic-Router SBR-FL
CAN-Fiber-Optic-Router SBR FX
CPC Runtime Kit for Windows
EMS offers a runtime kit for all of its CAN PC interfaces within one installation package for Windows 2000/XP/7 32-Bit/64-Bit/10.
CPC Development Kit for Windows
The CPC Development Kit for Windows offer the needed support for the developer of own applications for the PC/CAN interface family CPC.
CPC Development Kit for Linux
The CPC Development Kit for Linux offer the needed support for the developer of own applications for the PC/CAN interface family CPC.
CG-ARM7 Development Kit
This offers a complete development environment for the CAN/CAN gateway family CG-ARM7.
SerCAN/ARM7 Development Kit
This offers a complete development environment for the SerCAN/ARM7/RMD.
proCANtool CANopen Device Monitor
The proCANtool CANopen Device monitor serves for graphical inspection and configuration of devices in a CANopen network.
proCANtool CANopen Library
The proCANtool CANopen Library offers all services needed to implement CANopen communication, as outlined in the communication profile DS-301 v4.x.
Legacy Products
Production of legacy products to supply spar parts will be checked on request. If you need a legacy product, you can use the contact form or an e-mail directly.