Ethernet/CAN Interface EtherCAN CI-ARM9

is a gateway between up to 2 CAN channels and Ethernet systems. It allows processing of messages in the device.

Special Features

Ethernet/CAN Interface EtherCAN CI-ARM9

EtherCAN CI-ARM9 Version 3.0
454 MHZ ARM9 CPU (Freescale I.MX287)
128 MB SDRAM, 4 GB eMCC Flash
10/100 MBit Ethernet
2 CAN channels
Individual galvanic decoupling of both CAN transceivers
RS232 interface for configuration
USB Host interface
SD-Card slot
Embedded Linux operating system
Rail mountable
Easy development of applications running on the device possible
Free of charge development kits for Windows 7/8.x/10 an Linux for client applications

Description

EtherCAN CI-ARM9 acts as a gateway between CAN and Ethernet systems. It is essentially suitable for applications where processing of messages in the gateway is needed. This includes i.e. visualization of CAN messages by a Web server, complex protocol conversions and others. A Freescale ARM9 CPU (I.MX287) clocked with 454 MHz gives enough power for these applications. The device has 128 MB SDRAM and 4 GB eMMC Flash memory. The CAN interface is realized by the two internal CAN controllers of the CPU. Both channels are individually galvanic decoupled from CPU and power supply. A USB 2.0 full speed host interface enables the connection of external peripherals like USB memory sticks or USB WLAN adapters. The module is intended to be rail mounted.

Ordering information

Equipment / Variants

12-20-309-10

EtherCAN CI-ARM9/RMD -V. 3.0

12-20-310-10

EtherCAN CI-ARM9/RMD - M4D - V. 3.0

Technical Data

Layout and Connection

Limiting Values

Parameter	Minimal	Maximal	Unit
Storage temperature	-40	+85	°C
Operating temperature	-20	+60	°C
Supply voltage	-36	+36	V
Voltage on the bus connections	10	+30	V

Any (also temporary) stress in excess of the limiting values may cause permanent damage on EtherCAN CI-ARM9 and other connected devices. Exposure to limiting conditions for extended periods may affect the reliability and shorten the life cycle of the device.