CAN Physical Layer Analyzer CANwatch

CAN Physical Layer Analyzer CANwatch

is an analyser supporting easy error detection during installation and operation of CAN networks.

Special Features

CAN Physical Layer Analyzer CANwatch

  • Fast recognition of installation errors
  • Preventive diagnosis allows increase of system availability
  • Scanning of the analog signal and evaluation of the signal quality
  • Suitable for system integrators and plant operators

Description

CANwatch is an analyzer supporting easy error detection during installation and operation of CAN networks. CANwatch judges the analog signal on the bus and detects errors like e.g. invalid levels, overshoots, slow slopes and short circuits within the signal lines. Besides the diagnosis of problems during installation CANwatch offers the possibility to detect signal deficiencies below the level causing failures. This allows preventive error detection and thus an increase regarding the availability of automated systems. Errors on the physical level of the CAN bus cannot be detected by protocol analyzers and could until now only be analyzed by specialists with expensive and bulky hardware. Due to the easy diagnosis and display with LED’s CANwatch offers fast detection and correction of errors also to installers and plant operators.

Ordering information

Equipment / Variants

12-10-001-10

CANwatch

CAN Physics: high speed

Structural shape: Mounting rail

Protocol: CAN

0

Technical Data

Layout and Connection

The bus interface is realized with D-Sub 9 connectors complying to the CiA standard DS-102.

PinNameFunction
1n.s.Reserved, do not connect
2CAN_LCAN data line (dominant low)
3GNDGround
4n.s.Reserved, do not connect
5n.s.Reserved, do not connect
6GNDOptional ground
7CAN_HCAN data line (dominant high)
8n.s.Reserved, do not connect
9VccSupply voltage

Limiting Values

ParameterMinimalMaximalUnit
Storage temperature-20+80°C
Operating temperature0+60°C
Supply voltage-100+35V
Voltage on bus connections-2+7V
Admissable power consumption (at 60°C)n.s.2000mW

Any (also temporary) stress in excess of the limiting values may cause permanent damage on CANwatch and other connected devices. Exposure to limiting conditions for extended periods may affect the reliability and shorten the life cycle of the device.

Nominal Values

ParameterMinimalTypicalMaximalUnit
Supply voltage102430V
Current consumptionn.s.40n.s.mA

All values, unless otherwise specified, refer to a supply voltage of 24 V and an environmental temperature of 20 °C.

Scope of Delivery

  • CANwatch
  • User Manual

Related Products

CPC Runtime kit for Windows

CPC Development Kit for Windows

proCANtool CANopen Device Monitor

Further Information

CAN Physical Layer Analysis

International Sales

For US/Canada/Mexico sales, please contact: Traquair Data Systems, Inc. (www.traquair.com); sales@traquair.com; Ph: +1 607 266 6000